Tecsun PL-880 - Sleep Timer and Time Setting; Sleep Timer; Time Setting

1. In POWER OFF mode, press &
hold the [POWER] button untill
the sleep timer symbol “ ”
flashes on the display.
2. Rotate the [TUNING] knob
immediately to select a sleep
timer from 1 - 120 minutes or
select “ ” for POWER ON
mode (the radio will be turned on
after 1 second).
SLEEP TIMER
1. Press & hold the [TIME] button
until the hours indicator starts
flashing. Rotate the [TUNING]
knob to adjust the hours, or
directly input the time by pressing
the [ 0 – 9 ] numeric keys.
2. While the hours indicator is flashing,
press the [TIME] button again to
select the minutes indicator.
Rotate the [TUNING] knob to
adjust the minutes, or directly enter
it by pressing the [0 – 9] numeric
keys.
3. Short press the [TIME] button to
confirm, or wait for 3 seconds
to automatically confirm the time
setting.
TIME SETTING
SLEEP
Sleep time range
flashing
Note: The default setting of the sleep timer is “ ”.
SLEEP
flashing
PL-880 16