FM FREQUENCY RANGE
Press & hold the [FM SET] button until 88-108MHz, 76-108MHz
or 87-108MHz appears on the display. Press the [FM SET]
button to select a suitable frequency range for FM.
TURN ON/OFF LW
To turn ON/OFF LW, press & hold the [MW/LW] button until “LW
ON” or “LW OFF” appears on the display.
MW (AM) 9K/10K TUNING STEPS
To select your desired AM tuning steps, press & hold the
[9/10kHz] button until “9kHz” or “10kHz” appears on the display.
AUTO-SORTING STATION LIST
In POWER OFF mode, to automatically sort all stored station
memories, press & hold the [ ] button for about 2 seconds
until the memory page number in the upper right corner starts
running.
This function is able to:
1. Remove all duplicate stations. Especially useful after storing
stations manually, as you may sometimes store a station more
than once.
2. Auto-sorting the sequence of stored stations.
- In page P0, select your desired band to find all stored
stations in sequence of frequency (from low to high).
- In page P01-24, all stored stations are placed in sequence of
frequency (from low to high), and in sequence of FM, SW,
MW, LW.
Note:
After auto sorting the station memories, the station sequence will
be re-arranged.
SYSTEM SETTING (In Power Off Mode)
23 PL-880
To Next Page
Loading...
