Rotate the [VOLUME] knob upward or downward to adjust to your
desired volume level.
VOLUME ADJUSTMENT
VF: Press the [VF/VM] button. When the station frequency
indicator flashes twice, the VF mode is activated.
VM: Press the [VF/VM] button. When the station memory
indicator in the top right corner of the display flashes, the VM
mode is activated.
( ) ( )
VF VIEW FREQUENCY /VM VIEW MEMORY MODE
Note:
When the memory contains no stored stations, it is not possible to
switch between the VF (View Frequency) and VM (View Memory)
mode. If there are no stored stations in memory, then the device
will automatically be in VF mode.
VF status
Flashing 2 times
VM status
PAGE
PRESET
Flashing 3 times
PL-880 8
To Next Page
Loading...
