EasyManuals Logo

Tecsun PL-880 User Manual

Tecsun PL-880
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
POWER
TUNING
TECSUN
1. Open the battery compartment located at the back of the unit,
properly install the included 18650 lithium battery by following
the polarity diagram, then close the battery door.
2. Press the [POWER] button to turn ON/OFF the device.
Note:
If the radio is unable to turn on, please make sure the battery
has sufficient power, is installed correctly, and whether the key
lock function has not been switched on. If the device is locked,
the display will show [ ]; to unlock, press and hold the [ ]
button until the key symbol disappears from the display.
be sure to follow the indicated battery polarity.
TURN ON/OFF THE RADIO
Press
PL-880 6
FM STEREO / LW / MW / SW-SSB PLL SYNTHESIZED RECEIVER
PL-880
TECSUN
FM: 64-108 MHz
MW: 522-1620 (520-1710) kHz
LW: 100-519 kHz
SW: 1711-29999 kHz
BATTERY: Li-ion 3.7V (18650)
DC: 5V 500mA
MADE IN CHINA

Other manuals for Tecsun PL-880

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tecsun PL-880 and is the answer not in the manual?

Tecsun PL-880 Specifications

General IconGeneral
AM Frequency Range520 - 1710 kHz
LW Frequency Range100 - 519 kHz
SW Frequency Range1711 - 29999 kHz
Headphone Jack3.5 mm
Dimensions192 x 113 x 33 mm
ModesAM, FM, LW, SW
FM Frequency Range64 - 108 MHz
Tuning Steps1 kHz (AM/SW)
SelectivityFM: >60dB / AM: >40dB
Audio Output450mW
Power SupplyDC 5V
Battery LifeUp to 20 hours
Additional Featuresalarm clock, sleep timer

Related product manuals