Tecsun PL-880 - Alarm and Sound Issues; Charging and Malfunction Resolution

The sound of SW
SSB broadcasting is
too low.
The default bandwidth
is Narrow band.
Press the [AM BW]
button to select the Wide
band.
Poor AM reception in
USA.
- USA uses 10kHz AM
tuning steps, the
device may still be set
to 9kHz.
- Turn off the radio
press the [9/10kHz]
button to select
accurate tuning step.
QUESTIONS ANSWERS SOLUTIONS
The charging time
becomes shorter and
shorter.
Radio malfunction
The rechargeable
battery is getting old.
There may be some
form of interference,
causing the microchip
to not function properly.
Replace the old
rechargeable battery with
a new one.
Remove the battery.
Reinstall the battery once
the device's display has
turned off completely. If
the device is still not
working, please press
the reset button with a
pointed object.
When the alarm goes
off, there is only noise
in the broadcasting.
- Did not set the proper
radio station for the
alarm.
- Or there is no
broadcasting at that
frequency.
- Preset your alarm
station properly.
- Make sure it is possible
to receive radio
broadcastings at your
location.
PL-880 26