EasyManua.ls Logo

Tektronix 2205 - Page 159

Tektronix 2205
210 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EFFECTIVE SERIAL NUMBER: HK54509 and HK12226
TEXT CHANGES
Tektronix MANUAL CHANGE INFORMATION
committed to excellence Date: 8-2 3-9 1 Change Reference: M73789fRevY
Product: 2205 SERVICE MANUAL
_____________
:1 . : ' Manual Part Number: 070-67 16-0 0
______________________________
DESCRIPTION________________________ Product Group 46
Page 4 -2 Table 4 -1 TEST EQUIPMENT REQUIRED
13. Auto Transformer
Load: 95 Vac to l 28 Vac,
Adjust switching fre- Tecnipower® W10MT3W
40W (60 VA).
quency of power supply
PAGE 5 -4
ADD:
Check/Adjust Switching Frequency (R998)
(The following steps must be performed at the beginning of the power supply adjustment procedure.)
a. ADJUST-R998 (SW FREQ ADJ) fully counterclockwise. Set the UNE VOLTAGE SELECTOR switch to 115V.
b. Connect the power cord from the auto transformer to the instrument. Turn the instrument power on.
c. Increase auto transformer voltage to 128V. Allow at least 10 minutes warm up time before proceeding with the
following adjustments and checks.
d. Set up test oscilloscope:
VERTICAL MODE to CHI
CHI to 1V/DIV (X10 probe) or 10V/DIV {XI probe), DC Coupled
HORIZONTAL MODE to XI , 5ms/DIV
TRIGGER MODE to P-P AUTO, CHI SOURCE
e. Monitor the waveform atW951 via XI orXIO probe. The period of the waveform w ill be approximately 3 divisions
or 15p.s.
f. ADJUST - R998 (SW FREQ ADJ) until the period of the waveform is 4.8 divisions or 24*is.
g. CHECK Period of the waveform is within 20 to 25jas (4.0 to 5.0 divisions) while the auto transformer voltage is
adjusted through the range of 95 to 128V.
h. Readjust R998, if necessary, to keep the period of the waveform within specification through the rated line voltage
range.
REPLACEABLE ELECTRICAL PARTS LIST CHANGES
REMOVE:
A1C932 290-0806-00
CAP,FXD.ELCTLT:3.3UF,+75-10%,350VDC
ADD:
A6 671-2115-00
CIRCUIT BD ASSY:FREQUENCY STABiUZING CIRCUIT
A6C932
290-0806-00
CARFXD.ELCTLT:3.3UF, + 75-10%,350VDC
A6C993
290-1150-00
CAP,FXD,ELCTLT:15UF,+50-10%,16VDC
A6R996
315-0362-00
RES, FXD,FILM:3.6K 0HM,5%.0.25W
A6R997
315-0362-00
RES,FXD,FILM:3.6K OHM,5%,0-25W
A6R998
311-2421-01
RES,VAR,NONWW:TRMR,1 K
A6CR992
152-0141-02
DIODE,SIG:ULTRA FAST;40V.1S0MA.4NS,2PF,1 N4152
A6VR989 152-0217-00
DIODE,ZENER:B.2V,5%,0.4W;1N756AFMLY
Page 1 of 2

Table of Contents

Other manuals for Tektronix 2205

Related product manuals