EasyManua.ls Logo

Tektronix 2430 - Page 25

Tektronix 2430
450 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-15
Environmental Requirements
The 2430 Digital Oscilloscope meets the environmental require-
ments of MIL-T-28800C for Type III, Class 3, Style D equipment,
with the humidity and temperature requirements defined in para-
graphs 3.9.2.2, 3.9.2.3, and 3.9.2.4.
Temperature
Operating
-15°C to +55°C.
Nonoperating (storage)
-62°C to +85°C.
Altitude
Operating
To 15,000 feet (4500 meters). Maximum operating temperature
decreased 1°C for each 1000 feet (300 meters) above 5000 feet
(1500 meters).
Nonoperating (storage)
To 50,000 feet (15,000 meters).
Humidity
Operating and Storage
Stored at 95% relative humidity for five cycles (120 hours) from
30°C to 60°C, with operation performance checks at 30°C and
55°C.
Vibration
Operating
15 minutes along each of three axes at a total displacement of
0.025 inch (0.64 mm) p-p (4 g at 55 Hz), with frequency varied
from 10Hz to 55 Hz in one-minute sweeps. Hold 10 minutes at
each major resonance, or if none exist, hold 10 minutes at 55 Hz
(75 minutes total test time).
Shock
Operating and Nonoperating
50-g, half-sine, 11-ms duration, three shocks on each face, for a
total of 18 shocks.
Transit Drop (not in shipping package)
12-inch (300-mm) drop on each corner and each face (exceeds
MIL-T-28800C, paragraphs 3.9.5.2 and 4.5.5.4.2).
Bench Handling
Cabinet On and Cabinet Off
MIL-STD-810C, Method 516.2, Procedure V (MIL-T-28800C,
Paragraph 4.5.5.4.3).
Topple (cabinet installed)
Operating
Set on rear feet and allow to topple over onto each of four adja-
cent faces (Tektronix Standard 062-2858-00).
Packaged Transportation
Drop
Meets the limits of the National Safe Transit Assn., test pro-
cedure 1A-B-2; 10 drops of 36 inches (914 mm) (Tektronix Stand-
ard 062-2858-00).
Vibration
Meets the limits of the National Safe Transit Assn., test pro-
cedure 1A-B-1; excursion of 1 inch (25.4 mm) p-p at 4.63 Hz
(1.1 g) for 30 minutes (Tektronix Standard 062-2858-00).
STANDARD INSTRUMENT
Performance Requirements
Characteristics
Table 1-2
Environmental Characteristics
Specification-2430 Service

Related product manuals