Tektronix 475 Technical Manual

TM 11-6625-2735-14-1
TABLE 1-1 (cont)
ELECTRICAL
Characteristics
Performance Requirements
Supplemental Information
Sensitivity
DC Coupled
AC Coupled
HF REJ Coupled
LF REJ Coupled
Trigger Jitter
External Trigger Input
Maximum Input Voltage
Input Resistance and Capa-
citance
1-4
TRIGGER SYSTEM
0.3 div internal or 50 mV external
from DC to 40 MHz, increasing to
1.5 div internal or 250 mV external
at 200 MHz.
0.3 div internal or 50 mV external
from 60 Hz to 40 MHz, increasing to
1.5 div internal or 250 mV external
at 200 MHz. Attenuates signals
below about 60 Hz.
0.5 div internal or 100 mV external
from 60 Hz to 50 kHz. Attenuates
signals below about 60 Hz and above
about 50 kHz.
0.5 div internal or 100 mV external
from 50 kHz to 40 MHz, increasing
to 1.5 div internal or 500 mV ex-
ternal at 200 MHz. Attenuates sig-
nals below about 50 kHz.
0.2 ns or less at 200 MHz at
1 ns/DIV sweep rate (X10 MAG on).
250 V DC + peak AC or 250 V P-P AC
(1 kHz or less).
1 M within 10%, paralleled by ap-
proximately 20 pF

Tektronix 475 Specifications

General

Brand	Tektronix
Model	475
Category	Test Equipment
Language	English