Specifications
AFG3000 Series Quick Start User Manual
69
FSK (Frequency Shift Keying)
Carrier Waveforms Standard waveforms (except Pulse, DC, and Noise) and Arb
Modulation Source Internal or External
Internal Key Rate 2 mHz to 1.000 MHz
Numbers of Key 2
PWM (Pulse Width Modulation)
Carrier Waveforms Pulse
Modulation Source Internal or External
Internal Modulating
Waveforms
Sine, Square, Ramp, Noise, and Arb
2
Internal Modulating
Frequency
2 mHz to 50.00 kHz
Deviation Range 0.0% to 50.0% of pulse period
Sweep AFG3021/AFG3022 AFG3101/AFG3102 AFG3251/AFG3252
Type Linear or Logarithmic
Start/Stop Frequency
3
(except Arb)
1 µHz to 25 MHz 1 µHz to 100 MHz 1 µHz to 240 MHz
Start/Stop Frequency
(Arb)
1 mHz to 25 MHz 1 mHz to 100 MHz 1 mHz to 240 MHz
Sweep/Hold/Return Time
4
Range:
1 ms to 300 s (Sweep time)
0 ms to 300 s (Hold/Return time)
Resolution: 1 ms or 4 digits
Total Sweep Time Accuracy,
typical
≤ 0.4%
1. The maximum waveform length for Arb is 4,096. Waveform data points over 4,096 are ignored.
2. The maximum waveform length for Arb is 2,048. Waveform data points over 2,048 are ignored.
3. Pulse, DC, and Noise waveforms are not available.
4. Total sweep time = Sweep time + Hold time + Return time ≤ 300 s
Modulation (cont.)
To Next Page
Loading...
Need help?
General
