EasyManuals Logo

Tektronix AFG31000 Series Service Manual

Tektronix AFG31000 Series
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
AFG31000 Series Arbitrary Function Generator Service Manual
39
Maintenance
This section contains information needed to do periodic, preventative, and corrective maintenance on
your AFG.
Service preparation
This product is intended for use by personnel who recognize shock hazards and are familiar with the
safety precautions required to avoid injury. Read and follow all installation, operation, and
maintenance information carefully before using the product.
If the product is used in a manner not specified, the protection provided by the product warranty may
be impaired. Operators of this product must always be protected from electric shock at all times. The
responsible body must ensure that operators are prevented access and/or insulated from every
connection point.
Refer to the Operating basics section of this manual for information.
Preventing ESD
When performing any service that requires internal access to the AFG31000 Series, follow the
precautions below. These precautions prevent damage to internal modules and components due to
electrostatic discharge (ESD).
CAUTION. Static discharge can damage any semiconductor component in the AFG31000 Series.
Minimize handling of static-sensitive modules.
Transport and store static-sensitive modules in their static-protected containers or on a metal
rail. Label any package that contains static-sensitive modules.
Discharge the static voltage from your body by wearing a grounded antistatic wrist strap while
handling the modules. Service static-sensitive modules only at a static-free workstation.
Do not allow anything capable of generating or holding a static charge on the workstation
surface.
Handle circuit boards by the edges when possible.
Do not slide the modules over any surface.
Avoid handling modules in areas that have a floor or work-surface covering that will generate
a static charge.
Preventative maintenance
Preventative maintenance consists of visually inspecting and cleaning your AFG and using general
care when operating it. Perform preventative maintenance more often if you operate your AFG in a
severe environment.
Maintenance

Table of Contents

Other manuals for Tektronix AFG31000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tektronix AFG31000 Series and is the answer not in the manual?

Tektronix AFG31000 Series Specifications

General IconGeneral
BrandTektronix
ModelAFG31000 Series
CategoryInverter
LanguageEnglish

Related product manuals