Application E xa
mples
4. Select the event(s) for which you want
to send an e-mail.
5. To include attachments, select the type
of attachment,
and then click Settings to
specify the format.
6. Set the maxim
um message limit and
e-mail size. (Maximum message limit
is 50 and maximum e-mail size is
2000 MB). Wh
en the maximum message
limit is reached, you must c lick Reset to
send more e-mails on event.
7. To ensure that you have set up the e-mail
addresses c
orrectly, send a test-mail by
clicking Send.
8. If necessary, click Config to access
the e-mail configuration dialog box and
adjust the
configuration.
Quick Tips
To save attachments to your instrument hard drive, set the maximum message size to zero. The attachments will be
saved to the default location C:\TekScope\Screen Captures, Waveforms, or Data depending on the type of attachment.
94 DPO7000 Series Q uick Start User Manual
To Next Page
Loading...
