Display a Wavefo
rm
Zooming in Multiple Areas
When you w ant to view and compare multiple areas of one record at the same time, use the following procedure.
1. Click and drag a box around the area of
the waveform that you w ant to zoom.
2. Select Zoom 1 On.
3. Click and drag a box around another
area of the waveform that you want to
zoom, and then select Zoom 2 On.
4. To adjust the zoomed area horizontally,
click the horizontal marker below the
Zoom box to select the zoomed area.
5. Use the multipurpose k nobs to adjust
the horizontal position and factor of the
selected zoom area.
DPO7000 S eries Quick Start User Manual 45
To Next Page
Loading...
