Analyzing Wavef
orms
Customizing an Automatic Measurement
You can customize automatic measurements by using gating, modifying measurement statistics, or adjusting the
measurement reference levels.
Gating
UseGatingtoconfine the measurement to a
certain portion of a waveform.
1. Select Measure > Gating > Gating ....
2. Position the gates by doing one of the
following:
Click Cursor to set the gated area to
the area between the cursors.
Click Zoom (1-4) to set the gated
area to the Zoom (1-4) graticule.
DPO7000 S eries Quick Start User Manual 53
To Next Page
Loading...
