Run Application
Software
Run Applicati
on Software
The Optional Application Software CD contains free five-time trials of optional application software that you can install on your
instrument. These applications provide application-specific m easurement solutions. Some examples are described below.
Additional packages may be available. Contact your Tektronix representative or visit our Web site at www.tektronix.com
for more information.
Use ET3 to perform 10/100/1000 Base-T Ethernet compliance testing.
Use USB to characterize USB2.0 signals including mask testing and parametric testing (S/W only).
Use PWR Power Measurement Software to quickly measure and analyze power dissipation in power supply switching
devices and magnetic components.
Use PTM Serial Protocol Trigger Software to trigger and decode 8 B/10 B data on high-speed serial or data protocols.
Decode is available on all models.
Use LSA Serial Analysis Software for CAN/LIN protocol triggering and analysis.
Use MT M Communication Mask Testing Software for mask compliance testing.
Follow the instructions provided with the
application software to install it. To run the
software, select Analyze and then select the
application.
84 DPO7000 Series Q uick Start User Manual
To Next Page
Loading...
