Pinpoint Trigge
rs
SendingE-mailonTrigger
You must configure e-mail on event before performing the following procedure. (See page 93, Setting Up E-mail on Event.)
1. Select Trig > A Event (Main) Trigger
Setup....
2. Select the Mode tab.
3. Under E-mail on Trigger, click On, and
then click Setup. (See page 93, Setting
Up E-mail on Event.)
Using Horizontal Delay
Use horizontal delay to acquire waveform
detail in a region that is separated from the
trigger location by a significant interval of
time.
1. Push DELAY.
2. Adjust the delay time with the horizontal
POSITION control, or enter the delay
time in
the control window.
3. Adjus
t the horizontal SCALE to acquire
the detail that you need.
34 DPO7000 Series Q uick Start User Manual
To Next Page
Loading...
