MyScope
Using MyScope Control Windows
To open a previously defined MyS cope control window, do the following:
1. Select MyScope > Open Control
Window... or one of the five m o st
recently used MyScope windows.
2. Select the M
yScope control window you
want to use, and then click Open.
To display the active MyScope control window, do the following:
1. Select MyScope > Current... or c lick
MyScop
e in the toolbar mode. (Your
MyScope control window remains active
even when it is not displayed.)
72 DPO7000 Series Q uick Start User Manual
To Next Page
Loading...
