Pinpoint Trigge
rs
Choosing a Trigger Type
Your instrume
nt allows you to modify basic trigger parameters from the front panel or set up more advanced triggers in
the Trigger Setup control window.
1. Push EDGE.
2. Set the source, slope and mode. To set
the coupling use the Trig > Edge Setup
menu.
3. To select one
of the other trigger types,
do one of the following:
Push ADVANCED
Select a trigger type directly from the
Trig menu.
4. Complete the trigger setup using the
controls displayed for the trigger type.
The c ontrols to set up the trigger vary
depending on the trigger type.
28 DPO7000 Series Q uick Start User Manual
To Next Page
Loading...
