Getting Acquain
tedwithYourInstrument
Control Panel
1. Push to automatically set up the vertical,
horizontal, a
nd trigger controls based on
selected channels.
2. Push to return settings to default values.
3. Push to make a hard copy or save a
screen capture.
4. Push to turn on MultiView Zoom and add
a magnified gra
ticule to the display.
5. Horizontall
y scale, position, delay, and
set r ecord length (resolution) of all
waveforms.
6. Use to start and stop acquisition, start a
single acqui
sition sequence, clear data,
or start fast acquisitions.
7. Use to set the trigger parameters. Push
Advanced to display additional trigger
functions.
The Arm, Ready, and Trig’D
lights show the acquisition status.
8. Turn to adjust waveform intensity.
9. Turn to adjust parameters selected from
the screen interface. Push to toggle
between nor
mal and fine adjustment.
10. Push to turn
cursors on or off.
11. Push to
turn the touch screen on and off.
12. Turn ch
annel displays on and off.
Vertically scale, position, or offset the
waveform. Toggle between position and
offset
.
DPO7000 S eries Quick Start User Manual 11
To Next Page
Loading...
