Getting Acquain
tedwithYourInstrument
Interface and Display
The menu bar mode provides access to commands that control all of the instrument features and functions. The toolbar
mode provides access to the most common features.
1. Menu Bar: Access to data I/O, printing,
online help, and instrument functions
2. Buttons/Menu: Click to toggle between
toolbar and menu bar modes and to
customize your toolbar
3. Multipurpose Knob Readouts: Adjust
and display parameters controlled by the
multipurpose knobs
4. Display: Live, reference, and math
waveforms display here, along with
cursors
5. Waveform Handle: Click and drag to
change vertical position of waveform.
Click the handle and change the position
and scale using the multipurpose knobs.
6. Controls Status: Quick reference to
vertical selections, scale, offset, and
parameters
7. Readouts: Display cursor and
measurement readouts in this area.
Measurements are selectable from the
menu bar or toolbar. If a control window
is displayed, some combinations of
readouts m ove to the graticule area.
WARNING. Automatic amplitude-related
measurements where the signal is vertically
clipped produce inaccurate results. Clipping
also causes inaccurate amplitude values in
waveforms that are stored or exported for
use in other programs. If a math waveform
is clipped, it will not affect amplitude
measurements on that math waveform.
8. Status: Display of acquisition status,
mode, and number of acquisitions;
trigger status; date; time; and quick
reference to record length and horizontal
parameters
DPO7000 S eries Quick Start User Manual 9
To Next Page
Loading...
