Tektronix DPO7254 - Using the Color Palettes

Display a Wavefo
rm
Using the Color Palettes
Select Displa
y > Record View Palette or
FastAcq/WfmDB Palette, and then select
one of the following color schemes for the
waveform and g
raticule:
Normal displ
ays hues and lightness
levels for best o verall viewing. The color
of each channel waveform matches the
color of the c
orresponding front-panel
vertical knob.
Temperature Grading displays areas of
the w aveform with the highest sample
density in r
ed shades. The areas of
lowest sample density appear in blue
shades.
Monochrome Green displays areas of
the w avefor
m with the highest sample
density in lighter green shades. The
areas of lowest sample density appear
in darker g
reen shades. It most closely
resembles analog oscilloscope displays.
Spectra
l Grading displays areas of
the w aveform with the highest sample
density in blue shades. The areas of
lowest
sample density appear in red
shades.
Monochrome Gray displays a reas of
the w aveform with the highest sample
densi
ty in lighter gray shades. The
areas of lowest sample density appear in
darker gray shades.
User displays the waveform in a
user
-defined color.
Quick Tips
Choose one of the color grading palettes in the Display > Color s control window to see different sample densities
represented in different colors.
There are two color palettes, one for Record View and one for FastAcq/WfmDB.
42 DPO7000 Series Q uick Start User Manual