Preface
Preface
This manual describes the installation and operation of DPO 7000 Series Instruments. Basic operations and concepts are
presented in this manual. For more detailed information see the online help on your instrument. The following i nstruments
are supported by this manual:
DPO7254
DPO7104
DPO7054
Key Features
DPO7000 Series instruments can help you verify, debug, and characterize electronic designs. Key features include:
2.5 GHz bandwidth and 10 GS/s real time sampling rate on all channels, 40 GS /s on 1 channel, DPO7254
1 GHz bandwidth and 5 GS/s (10 GS/s optional) real time sampling rate on all channels, 20 G S/s (40 GS/s optional)
on 1 channel, DPO7104
500 MHz bandwidth and 2.5 GS/s (5 GS/s optional) real time sampling rate on all channels, 10 GS/s (20 GS/s optional)
on 1 channel, DPO7054
Record lengths up to 400,000,000 samples, depending on model and option
Up to 1.0% DC vertical gain accuracy
Four input channels (each with 8-bit resolution when not in Hi-Res mode), auxiliary trigger input and output
Sample, envelope, peak-detect, high-resolution, waveform database, average, and FastAcq acquisition modes
Full programmability, with an extensive GPI B-command set and a message-based interface
Trigger types include edge, logic, pulse (may be logic qualified), selectable for both A and B trigger events. Window
trigger mode triggers as the trigger source passes into or out of a defined window. Triggers can be logic qualified. Setup
and hold trigger mode triggers when a logic input changes state inside of the setup and hold times relative to the clock.
Trigger jitter is less than 1.5 ps RMS (typical), depending on model. You can typically trigger on a glitch or pulse of less
than 200 ps in width. Low speed serial triggering and serial pattern triggering are available on some models or options.
Powerful built-in measurement capability, including histograms, automatic measurements, eye pattern measurements
and measurement statistics
Mathematically combine waveforms to create
waveforms that support your data-analysis task. Use arbitrary filters in
math equations. U se spectral analysis to analyze waveforms in the frequency domain.
A large 12.1 inch (307.3 mm) high resolution XGA color display that supports color grading of waveform data to show
sample density. Display 10 divisions both horizontally and vertically.
MultiView Zoom to view and compare u p to four zoom areas at a time. Lock and manually or automatically scroll up
to four zoom areas.
Customizable MyScope control windows
An intuitive, graphical user interface (UI), with online help that is built in and available on screen
Internal, removable disk storage
Wide array of probing solutions
vi DPO7000 Series Quick Start User Manual
To Next Page
Loading...
