Application E xa
mples
3. Select Display > Display Persistence
>Infinite Persistence.Inthisexample,
we are looking
at a clock signal. After
observing the signal for 1–2 minutes,
but before you look for the problem
elsewhere, go
to step 4.
4. Press FastAcq.
5. Find glitches, transients, or other random
anomalies that are present in the signal.
In this example, FastAcq revealed an
≈300 ns positive glitch after only a few
seconds.
86 DPO7000 Series Q uick Start User Manual
To Next Page
Loading...
