Tektronix Keithley 2260B Series - Page 2

ADDENDUM
Please replace the “Set up” section on page 40 through page 41 of
the 2260B user manual with the following replacement:
Set Up
Line Voltage Connection – 1080W Models
Background
The 1080W (2260B-30-108/80-40/ 250-13/800-
4) models use a universal power input that can
be used with 100 and 200 VAC systems. To
connect or replace the power cord, use the
procedure below:
Warning
The following procedure should only be attempted
by competent persons.
Ensure the AC power cord is not connected to
power.
Removal
1. Turn off the power switch.
1
2. Unscrew the power cord
strain relief.
3. Remove the 2 screws
holding the power cord
cover and remove.
3
2