Tektronix Keithley 2260B Series - Page 3

4. Slide the cover off the AC
terminals.
5. Remove the AC power
cord wires.
5
4
Installation
1. Thread the power cord through the strain relief
and through the power cord cover.
1
2. Connect the AC power cord
wires to the AC input
terminals.
 White/Blue /Black(India)
 Neutral (N)
 Green/Green-yellow
 GND ( )
 Black/Brown/Red(India)
 Line (L)
LN
Line
Neutral
Ground
3. Set the cover over the AC
terminals.
3