Tektronix Keithley 4200A-SCS - System Directories and Files

Model 4200A-SCS Setup and Maintenance User's Manual Section 5: System administration
4200A-908-01 Rev. A December 2020 5-3
To set up a new user account:
1. Make sure that you are logged into the Microsoft
®
Windows
®
administrative account. The default
administrative account is kiadmin.
2. From the Windows start menu, type settings in the search box. The results display the Windows
Settings utility.
3. Press <Enter> to open the application.
4. Select Accounts.
5. Select Family & other people, then Add someone else to this PC.
6. Select I don't have this person's sign-in information.
7. Complete the account information.
8. Select Next.
9. Log on using the new account and set up the desktop and other elements of the new profile.
10. Select Start > All Programs > Keithley Instruments > Initialize New User to configure Clarius
+
for the new user.
Initialize New User must be run each time a new user account is created.
System directories and files
All Clarius
+
files are stored in the C:\s4200 folder.
User files and the sample projects and standard libraries that are included with Clarius
+
are stored in
the directory C:\s4200\kiuser. All 4200A-SCS users can access these libraries.
The subdirectories in the user folder contain:
• Devices: Default Clarius device library.
• Projects: Default Clarius project library.
• Tests: Default Clarius test library.
• usrlib: Default collection of KULT user libraries.
The system directory stores all of the binary and executable files that Clarius
+
needs to control the
4200A-SCS. Clarius
+
system files are stored in C:\s4200\sys.
The files stored in the
C:\s4200\sys
and
C:\4200A-SCS
folders must not be modified by
4200A-SCS users or by system administrators. This folder (directory) must reside on the
4200A-SCS hard disk.