Tektronix TDS210 - Page 119

Command Descriptions
TDS200, TDS1000/2000, TDS1000B/2000B, TPS2000 Programmer
2-99
DISplay:INVert,
DISplay:BRIGHTness
DISplay:FORMat
Sets or queries the oscilloscope display format. This command is
equivalent to setting the Format option in the Display menu.
Display
DISplay:FORMat { XY | YT }
DISplay:FORMat?
XY displays the voltage of channel 1 (horizontal axis) against the
voltage of channel 2 (vertical axis).
NOTE. Setting the display format to XY turns cursors off. Sending the
CURSor:FUNCtion command when the display format i s XY c auses
the oscilloscope to generate event 221 (Settings conflict) and leaves
the display in XY format.
YT sets the display to vertical values versus time format and is the
default mode.
DISplay:FORMat YT
Selects a voltage versus time format for the display.
DISplay:FORMat?
Might return XY for the display format.
Related Commands
Group
Syntax
Arguments
Examples