Tektronix TDS6000 Series Reference Manual

To Store Information
To Save and Recall W aveforms
To save or recall waveforms, select
Reference Waveforms and then Save Wfm... or
Recall Wfm... in the File menu.
Or touch the Refs button.
1
Use the reference setup control window to copy
a live waveform into one of four nonvolatile
reference waveform storage l ocations. You can
also display these wavef orm s as reference
waveforms.
To Save and Recall Instrument
Setups
To save an instrument setup, select
Instrument Setup in the File menu.
Or touch the
Setups button.
2
Use the settings control window to save the
current setup int o one of ten i nternal storage
locations. Use the pop-up keyboard to label the
setups for easy ident ifi cation.
Or select
Save Settings to File to st ore the
current setup on a disk drive. You can recall any
setup stored on di sk and then save it in an
internal setup storage location for
quicker access.
1
2
To restore the oscilloscope to a known initial state,
push the front -panel
DEFAULT SETUP button.
Or select
Recall Default Setup in the File menu.
3
3
Select Save Wfm to File to store the live
waveform as a file on a disk drive. You can
recall a waveform st ored on dis k into one
of the i nternal reference waveform
locations f or displ ay.

Tektronix TDS6000 Series Specifications

General

Brand	Tektronix
Model	TDS6000 Series
Category	Test Equipment
Language	English