Safety Summary
viii
VM700A Option 01 (NTSC) & Option 11 (PAL) User Manual
Grounding the Product
This product is grounded through the power cord. To avoid electric shock, plug the power cord into a properly
wired receptacle where earth ground has been verified by a qualified service person. Do this before making
connections to the input or output terminals of the product.
Without the protective ground connection, all parts of the monitor are potential shock hazards. This includes
knobs and controls that may appear to be insulators.
Use the Proper Power Cord
Use only the power cord and connector specified for this product. Use only a power cord that is in good
condition.
Use the Proper Fuse
To avoid fire hazard, use only the fuse specified in the parts list for this product, matched by type, voltage
rating, and current rating.
Do Not Operate Without a Cabinet
To avoid personal injury, do not operate the AM700 with its cabinet removed. When power is supplied to the
AM700 and the rear panel power switch is on, line voltage will be present in the instrument, even when the
POWER switch is set to STANDBY.
Do Not Operate in Explosive Atmospheres
To avoid explosion, do not operate this product in an explosive atmosphere.
Do Not Service Alone
Do not perform internal service or adjustment of this product unless another person capable of rendering first
aid and resuscitation is present.
To Next Page
Loading...
Need help?
General
