Tektronix WFM6120 Service Manual

Repackaging Instructions
Repackaging Instructions
This section contains the information needed to repackage the waveform monitor
forshipmentorstorage.
Packaging
When repacking the instrument for shipment, use the original packaging. If
the packagi
ng is unavailable or unfit for use, contact your local Tektronix
representative to obtain new packaging. Refer to Contacting Tektronix on the back
of the Title page for the mailing address, the e mail address, and phone number.
Seal the shipping carton with an industrial stapler or strapping tape.
Shipping to the S ervice Center
Contact the Service Center to get an RMA (Return Material Authorization)
number, and any return or shipping information you may need.
If the instrument is being shipped to a Tektronix Service Center, enclose the
following information:
The RMA number.
The ow
ner’s address.
Name and phone number of a contact person.
Type and serial number of the instrument.
Reason for returning.
A complete description of the service required.
Mark the address of the Tektronix Service Center and the return address on the
shipping carton in two prominent locations.
4–38 WFM6120, WFM7020, and WFM7120 Waveform Monitors Service Manual

Tektronix WFM6120 Specifications

General

Brand	Tektronix
Model	WFM6120
Category	Monitor
Language	English