Field Description
ISDN Port Select the ISDN port for which the MSN is to be configured.
Service Select the service to which a call is to be assigned on the MSN
below.
Possible values:
• *.' / (default value): Enables login with *.' /
• @3 : Default setting for PPP routing. Contains
automatic detection of the PPP connections stated below ex-
cept .:6=.
• *": Enables a number to be defined for IPSec callback.
• : : Other services can be selected: 7
(Allows 64 kpbs PPP data connections), 7 (Allows
56 kpbs PPP data connections), 6
6, 6, 6$
(Allows PPP connections with V.110 and bitrates of 9,600
bps, 14,400 bps, 19,200 bps, 38,400 bps), 6
(Allows PPP connections with V.120).
MSN Enter the number used to check the called party number. For
the call to be accepted, it is sufficient for the individual numbers
in the entry to agree, taking account of MSN Recognition.
MSN Recognition Select the mode your device is to use for the number comparis-
on for MSN with the called party number of the incoming call.
Possible values:
• @ /! (default value)
• /! @ ..: Always select if your device is con-
nected to a point-to-point connection.
Bearer Service Select the type of incoming call (service detection).
Possible values:
• . ; 6" (default value): Both data and voice calls.
• .: data call
• 6": Voice call (modem, voice, analog fax)
11 Physical Interfaces Teldat GmbH
136 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
