Field Description
er of this certificate.
Possible values:
• -3 (default value): In case there is an entry for a CDP, CRL
distribution point this should be evaluated in addition to the
CRLs globally configured in the device.
• J#: CRLs are always checked.
• ': No checking of CRLs.
Select radio
Only for Command Type = ?G 8/-' =#" and
?G 8/-' =#"
Select the WLAN module on which to perform the frequency
band scan.
WLC SSID
Only if Command Type = 8/24 6** *
Select the wireless network administered over the WLAN con-
troller whose status should be changed.
Set status
Only if Command Type = 8/24 6** *
Select the status for the selected wireless network.
Possible values:
• -" (default value)
• ."
21.7.3 Options
You configure the schedule interval in the Local Services->Scheduling->Options.
Fig. 186: Local Services->Scheduling->Options
Teldat GmbH
21 Local Services
bintec Rxxx2/RTxxx2 477
To Next Page
Loading...
Need help?
General
