20.2.4 CLID Translation
Here you define the processing of the calling party number for incoming calls. You can, for
example, add a prefix to a received call number in order to route corresponding outgoing
calls via a particular SIP account.
In the VoIP->Media Gateway->CLID Translation menu, a list of all existing entries is
shown on which the received number is edited.
20.2.4.1 Edit or New
Choose the icon to edit existing entries. Select the New button to create entries for
CLID translation.
Fig. 160: VoIP->Media Gateway->CLID Translation-> +New
The VoIP->Media Gateway->CLID Translation-> +New menu consists of the following
fields:
Fields in the Basic Parameters menu.
Field Description
Description Enter the name of the entry.
Calling Line Select the ISDN line or SIP account from which the call comes.
The selection depends on the interfaces available and on the
SIP accounts that have been created.
Possible values:
• )A!" <B: Restricts the entry to the selected
Teldat GmbH
20 VoIP
bintec Rxxx2/RTxxx2 419
To Next Page
Loading...