Teldat bintec R3002 - PIM Rendezvous Points

16.4.2 PIM Rendezvous Points
In menu Multicast->PIM->PIM Rendezvous Points you determine which Rendezvous
Point is responsible for which group.
A list of all PIM Rendezvous Points is displayed.
Fig. 113: Multicast->PIM->PIM Rendezvous Points
16.4.2.1 Edit or New
Choose the icon to edit existing entries. To configure PIM Rendezvous Points, select
the New button.
Fig. 114: Multicast->PIM->PIM Rendezvous Points->New
The Multicast->PIM->PIM Rendezvous Points->New menu consists of the following
fields:
Fields in the PIM Rendezvous Point Settings menu.
Field Description
Multicast Group Range Select the Multicast group for the PIM Rendezvouz point. You
can enter -,, 3)# (default value), or specify a multicast
network segment by selecting *)"!" @ .
Multicast Group Ad-
dress
Only if Multicast Group Range = *)"!" @ 
16 Multicast Teldat GmbH
266 bintec Rxxx2/RTxxx2