Field Description
IGMP State Limit Enter the maximum permitted total number of incoming queries
and messages per second.
The default value is , i.e. the number of IGMP status mes-
sages is not limited.
16.3 Forwarding
16.3.1 Forwarding
In this menu, you specify which multicast groups are always passed between the interfaces
of your device.
16.3.1.1 New
Choose the Newbutton to create forwarding rules for new multicast groups.
Fig. 110: Multicast->Forwarding->Forwarding->New
The Multicast->Forwarding->Forwarding->New menu consists of the following fields:
Fields in the Basic Parameters menu.
Field Description
All Multicast Groups Select whether all multicast groups, i.e. the complete multicast
address range 224.0.0.0/4, are to be forwarded from the defined
Source Interface to the defined Destination Interface. To do
this, check ,
Disable the option if you only want to forward one defined mul-
ticast group to a particular interface.
Teldat GmbH
16 Multicast
bintec Rxxx2/RTxxx2 261
To Next Page
Loading...