Field Description
ing Your device then sends SNMP traps to the LAN's broadcast ad-
dress.
The function is activated by selecting ,.
The function is disabled by default.
SNMP Trap UDP Port Only if SNMP Trap Broadcasting is enabled.
Enter the number of the UDP port to which your device is to
send SNMP traps.
Any whole number is possible.
The default value is .
SNMP Trap Com-
munity
Only if SNMP Trap Broadcasting is enabled.
Enter a new SNMP code. This must be sent by the SNMP Man-
ager with every SNMP request so that this is accepted by your
device.
A character string of between and characters is possible.
The default value is *'% ().
23.4.2 SNMP Trap Hosts
In this menu, you specify the IP addresses to which your device is to send the SNMP traps.
In the External Reporting->SNMP->SNMP Trap Hosts menu, a list of all configured SN-
MP trap hosts is displayed.
23.4.2.1 New
Select the Newbutton to create additional SNMP trap hosts.
23 External Reporting Teldat GmbH
526 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
