Chapter 4 Reset
Resetting the device enables you to return your device to a predefined initial state. This
may be necessary if you have made incorrect configuration settings or the device is to be
reprogrammed.
Manually resetting the device
You can reset the device to the ex works state with the RESET button. Depending on how
long it is pressed for, the RESET button performs two different functions:
• After pressing briefly once, the device reboots.
• Hold the RESET button until the STATUS LED starts to flash. The device performs a
factory reset. This means the device is returned to its ex works state. The boot configura-
tion is deleted and all passwords are reset.
4 Reset Teldat GmbH
10 bintec Rxxx2/RTxxx2
To Next Page
Loading...