Teldat bintec R3002 - Https; HTTPS Server

21.2 HTTPS
You can operate the user interface of your device from any PC with an up-to-date Web
browser via an HTTPS connection.
HTTPS (HyperText Transfer Protocol Secure) is the procedure used to establish an en-
crypted and authenticated connection by SSL between the browser used for configuration
and the device.
21.2.1 HTTPS Server
In the Local Services->HTTPS->HTTPS Servermenu, configure the parameters of the
backed up configuration connection via HTTPS.
Fig. 171: Local Services->HTTPS->HTTPS Server
The Local Services->HTTPS->HTTPS Servermenu consists of the following fields:
Fields in the HTTPS Parameters menu.
Field Description
HTTPS TCP Port Enter the port via which the HTTPS connection is to be estab-
lished.
Possible values are  to $.
The default value is $.
Local Certificate Select a certificate that you want to use for the HTTPS connec-
tion.
Possible values:
• , (default value): Select this option if you want to
use the certificate built into the device.
21 Local Services Teldat GmbH
440 bintec Rxxx2/RTxxx2