Fig. 68: Wireless LAN Controller->Slave AP configuration->Wireless Networks
(VSS)->New
The Wireless LAN Controller->Slave AP configuration->Wireless Networks
(VSS)->New menu consists of the following fields:
Fields in the menu Service Set Parameters
Field Description
Network Name (SSID) Enter the name of the wireless network (SSID).
Enter an ASCII string with a maximum of 32 characters.
Also select whether the Network Name (SSID) is to be trans-
mitted.
The network name is displayed by selecting 6#,.
It is visible by default.
Intra-cell Repeating Select whether communication between the WLAN clients is to
be permitted within a radio cell.
Teldat GmbH
13 Wireless LAN Controller
bintec Rxxx2/RTxxx2 175
To Next Page
Loading...