Field Description
First select the port number range.
Possible values:
• -& (default value): The route is valid for all port numbers.
• * ,: Enables the entry of a port number.
• @ : Enables the entry of a range of port numbers.
• , : Entry of privileged port numbers: 0 ... 1023.
• *: Entry of server port numbers: 5000 ... 32767.
• 2,# : Entry of client port numbers: 1024 ... 4999.
• 2,# : Entry of client port numbers: 32768 ... 65535.
• ' ), : Entry of unprivileged port numbers: 1024
... 65535.
Enter the appropriate values for the individual port or start port
of a range in Port and, for a range, the end port in to Port.
DSCP / TOS Value Select the Type of Service (TOS).
Possible values:
• (default value): The type of service is ignored.
• .*2 =& 6,3: Differentiated Services Code Point
according to RFC 3260 is used to signal the priority of IP
packets (indicated in binary format).
• .*2 .", 6,3: Differentiated Services Code Point
according to RFC 3260 is used to signal the priority of IP
packets (indicated in decimal format).
• .*2 ?<", 6,3: Differentiated Services Code
Point according to RFC 3260 is used to signal the priority of
IP packets (indicated in hexadecimal format).
• (:* =& 6,3: The TOS value is specified in binary
format, e.g. 00111111.
• (:* .", 6,3: The TOS value is specified in decimal
format, e.g. 63.
• (:* ?<", 6,3: The TOS value is specified in
hexadecimal format, e.g. 3F.
Enter the relevant value for .*2 =& 6,3, .*2
.", 6,3, .*2 ?<", 6,3, (:* =&
14 Networking Teldat GmbH
194 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
