less detail. The first data packet which the properties configured here match specifies the
route for particular subsequent data packets.
Which data packets are subsequently routed via this route is configured in the Networking-
>Load Balancing->Special Session Handling->New->Advanced Settings menu.
If in the Networking->Load Balancing->Special Session Handling->New menu, for ex-
ample, you select the parameter Service = ) **/ (and leave the default value for
all the other parameters), the first HTTPS packet specifies the Destination Address and
the Destination Port (i. e. Port 443 with HTTPS) for data packets sent subsequently.
If, underFrozen Parameters, for the two parameters Destination Address and Destina-
tion Port you leave the default setting ,, the HTTPS packets with the same source
IP address as the first HTTPS packet are routed via port 443 to the same Destination Ad-
dress via the same interface as the first HTTPS packet.
14.3.2.1 Edit or New
Choose the icon to edit existing entries. Select the New button create new entries.
Fig. 85: Networking->Load Balancing->Special Session Handling->New
14 Networking Teldat GmbH
210 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
