Field Description
• 6/-'
Can only be selected for IPSec interfaces:
• *"
• *" 6/-'
• *"
• *" 6/-'
Encryption Method Only if an IPSec Peers is selected as Interface, Traffic shap-
ing is -" and Protocol Header Size below Layer 3 is not
0! ", ? :!!#I.
Select the encryption method used for the IPSec connection.
The encryption algorithm determines the length of the block
cipher which is taken into account during bandwidth calculation.
Possible values:
• .*E $.*E =,1!#E 2# ") ,"7
#G I =
• AES128, AES192, AES256, Twofish - (cipher block size =
128 Bit)
Real Time Jitter Con-
trol
Only for Traffic shaping = enabled
Real Time Jitter Control optimises latency when forwarding real
time datagrams. The function ensures that large data packets
are fragmented according to the available upload bandwidth.
Real Time Jitter Control is useful for small upload bandwidths (<
800 kbps).
Activate or deactivate Real Time Jitter Control.
The function is enabled with ,.
The function is disabled by default.
Control Mode Only for Real Time Jitter Control = enabled.
Select the mode for optimising voice transmission.
Possible values:
14 Networking Teldat GmbH
222 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
