Field Description
• .?2
Network Address Only for Network Configuration = *"
Enter the network address of the Drop In network.
Netmask Only for Network Configuration = *"
Enter the corresponding netmask.
Local IP Address Only for Network Configuration = *"
Enter the local IP address. This IP address must be identical for
all the Ethernet ports in a network.
DHCP Client on Inter-
face
Only for Network Configuration = .?2
Here you can select an Ethernet interface on your router which
is to act as the DHCP client.
You need this setting, for example, if your provider's router is
being used as the DHCP server.
You can choose from the interfaces available to your device;
however the interface must be a member of the drop-in group.
ARP Lifetime Determines the time period for which the ARP entries will be
held in the cache.
The default value is $ seconds.
DNS assignment via
DHCP
The gateway can modify DHCP packets which pass through the
drop-in group and identify itself as an available DNS server.
Possible values:
• 0" (default value)
• :1 -##
Exclude from NAT
(DMZ)
Here you can take data traffic from NAT.
Use this function to, for example, ensure that certain web serv-
ers in a DMZ can be accessed.
The function is enabled with ,.
Teldat GmbH
14 Networking
bintec Rxxx2/RTxxx2 237
To Next Page
Loading...
Need help?
General
