Field Description
• *": Static channel bundling.
• .&": Dynamic channel bundling.
Fields in the Dial Numbers menu
Field Description
Entries
Add new entries with Add.
Fields in menu Dial Number Configuration (appears only for Entries = Add)
Field Description
Mode Only if Entries = -
Defines whether Call Number should be used for incoming or
outgoing calls or for both. Possible values:
• = (default value): For incoming and outgoing calls.
• " : For incoming calls, where your connection partner
dials in to your device.
• :3  : For outgoing calls, where you dial your connec-
tion partner.
The calling party number of the incoming call is compared with
the number entered under Call Number.
Call Number Enter the connection partner's numbers.
Number of Used Ports Select which port is used.
Fields in the IP Options menu.
Field Description
OSPF Mode Select whether and how routes are propagated via the interface
and/or OSPF protocol packets are sent.
Possible values:
• ## (default value): OSPF is not activated for this inter-
face, i.e. no routes are propagated or OSPF protocol packets
sent over this interface. Networks reachable over this inter-
face are, however, included when calculating the routing in-
formation and propagated over active interfaces.
• -": OSPF is activated for this interface, i.e. routes are
propagated or OSPF protocol packets sent over this interface.
17 WAN Teldat GmbH
294 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
