Teldat bintec R3002 User Manual

Property bintec R4402 bintec RT4202
Relative atmospheric hu-
midity
10 % to 90 % non-condensing in
operation,
5 % to 95 % non-condensing when
stored
10 % to 90 % non-condensing in
operation,
5 % to 95 % non-condensing when
stored
Room classification Only use in dry rooms. Only use in dry rooms.
Available interfaces:
Ethernet IEEE 802.3 LAN
(4-port switch)
Permanently installed (twisted pair
only), 10/100/1000 mbps, auto-
sensing, MDIX
Permanently installed (twisted pair
only), 10/100/1000 mbps, auto-
sensing, MDIX
ETH5 Permanently installed (twisted pair
only), 10/100/1000 mbps, auto-
sensing, MDIX
Permanently installed (twisted pair
only), 10/100/1000 mbps, auto-
sensing, MDIX
ISDN BRI (S0) Euro-ISDN
(point-to-multipoint/point-to-point
connection)
TE or NT mode
Euro-ISDN
(point-to-multipoint/point-to-point
connection)
TE or NT mode
ISDN-PRI (2) ISDN Primary Rate Interface
TE or NT mode
-
Console/RS232 Baudrates: 1200 - 115200 Baud Baudrates: 1200 - 115200 Baud
FXS (internal)
- 4x for connection of analog tele-
phones or FAX
Available sockets:
Serial interface V.24 5-pole mini USB socket 5-pole mini USB socket
Ethernet interfaces RJ45 socket RJ45 socket
ISDN BRI interface RJ45 socket RJ45 socket
ISDN-PRI interface RJ45 socket
-
FXS
-
4x RJ45 sockets
Standards & Guidelines R&TTE Directive 1999/5/EC
CE symbol for all EU states
R&TTE Directive 1999/5/EC
CE symbol for all EU states
5 Technical data Teldat GmbH
22 bintec Rxxx2/RTxxx2

Teldat bintec R3002 Specifications

General

Brand	Teldat
Model	bintec R3002
Category	Gateway
Language	English