Teldat bintec R3002 - Page 561

Fig. 227: Monitoring+PIM+Not Interface-Specific Status
Values in the Not Interface-Specific Status list
Field Description
View
Select the desired view from the dropdown menu.
Are available: -,,, NENE@ *#, NE *#,
*E *# and
*EE@( *#
Values in the (*,*,RP) States list
Field Description
Rendevous Point IP
Address
Displays the IP address of the Rendezvous Point (RP) for the
group.
Upstream Join State The Upstream (*,*,RP) Join/Prune Status indicates the status of
the Upstream (*,*,RP) State Machine in the PIM-SM Specifica-
tion.
Upstream Neighbor IP
Address
Displays the primary IP address of the Upstream Neighbors, or
unknown (0) if the Upstream Neighbor IP address is not known,
or if it is not a PIM Neighbor.
Uptime Indicates the timespan of the RP's existence.
Teldat GmbH
24 Monitoring
bintec Rxxx2/RTxxx2 547