EasyManuals Logo

Teldat bintec R3002 User Manual

Teldat bintec R3002
622 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #579 background imageLoading...
Page #579 background image
matically overwritten when the new configuration is transferred to
the PBX.
Direct dial-in Performance feature of larger PBXs at the point-to-point connection:
The extensions can be called directly from outside.
Direct dialling range See Extension numbers range
DISA Direct Inward System Access
Display and output
of connection data
In the configuration, it is possible to define storage of data records
for specific terminals or all terminals. In the ex works setting, all in-
coming external connections and all external calls you make are
stored.
Display of caller's
number
A suitable telephone is a prerequisite for this feature. Transmission
of the telephone number must be permitted by the caller.
DLCI In a Frame Relay network, a DLCI uniquely describes a virtual con-
nection. Note that a DLCI is only relevant for the local end of the
point-to-point connection.
DMZ Demilitarised Zone
DNS Domain Name System
Do not disturb Station guarding
DOI Domain of Interpretation
Domain A domain refers to a logical group of devices in a network. On the
Internet, this is part of a naming hierarchy (e.g. bintec.de).
Door intercom Door intercom device. It can be connected to various PBXs. A tele-
phone can be used to take an intercom call and open the door.
Door intercom on
analogue connection
An analogue connection can be set up for connected of function
module M06 to connect a DoorLine intercom system.
Door terminal ad-
apter
The function module can be installed on an analogue connection of
your PBX. If a door intercom (DoorLine) is connected to your PBX
via a function module, you can speak with a visitor at the door via
every authorised telephone. You can assign particular telephones to
each ring button. These phones then ring if the ring button is
pressed. On analogue telephones, the signal on the telephone
matches the intercom call. In place of the internal telephones, an ex-
ternal telephone can also be configured as the call destination for
Teldat GmbH
Glossary
bintec Rxxx2/RTxxx2 565

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Teldat bintec R3002 and is the answer not in the manual?

Teldat bintec R3002 Specifications

General IconGeneral
BrandTeldat
Modelbintec R3002
CategoryGateway
LanguageEnglish

Related product manuals