TAPI Telephony Application Program Interface
TAPI configuration You can use the TAPI configuration to modify the TAPI driver in line
with the program that uses this driver. You can check which MSN is
to be assigned to a terminal, define a line name, and configure the
dialling parameters. First configure your PBX. You must then config-
ure the TAPI interface. Use the "TAPI Configuration" program.
TCP Transmission Control Protocol
TCP/IP Transmission Control Protocol/Internet Protocol
TCU Telecommunication connection unit
TE Terminal equipment
TEI Terminal Endpoint Identifier
Telefax Term that describes the remote copying for transmitting texts,
graphics and documents true to the original over the telephone net-
work.
Telematics Telematics is a combination of telecommunication and computer
technology and describes data communication between systems
and devices.
Telnet Protocol from the TCP/IP protocol family. Telnet enables communic-
ation with a remote device in the network.
Terminal adapter Device for interface adaptation. It enables different equipment to be
connected to T-ISDN. The terminal adapter a/b is used to connect
analogue terminals to the So interface of the ISDN Basic Rate Inter-
face. Existing analogue terminals can still be operated with tone di-
alling.
TFTP Trivial File Transfer Protocol
Three-party confer-
ence
A three-way telephone call. Performance feature in T-Net, T-ISDN
and your PBX.
Tiger 192 Tiger 192 is a relatively new and very fast hash algorithm.
TLS Transport Layer Security
Tone dialling Multifrequency code method (MFC)
Transfer internal
code
If you receive an internal call, e.g. from the subscriber with internal
telephone number 22, while you are away, this subscriber's internal
Teldat GmbH
Glossary
bintec Rxxx2/RTxxx2 589
To Next Page
Loading...
Need help?
General
