Fig. 20: GUI Home page
8.3.1.1 Call up the GUI .
(1) Check whether the device is connected and switched on and that all the necessary
cables are correctly connected (see Setting up and connecting on page 6).
(2) Check the settings of the PC from which you want to configure your device (see Con-
figuring a PC on page 44).
(3) Open a web browser.
(4) Enter )455 in the address field of the web browser.
(5) Enter in the User field and enter in the Password field and click LO-
GIN.
You are now in the status menu of your device's GUI (see Status on page 70).
8.3.1.2 Operating elements
GUI window
The GUI window is divided into three areas:
8 Access and configuration Teldat GmbH
58 bintec Rxxx2/RTxxx2
To Next Page
Loading...