Telecom R6 - H O W D O I C O N N E C T T H E C H a R G E R; T I P S a B O U T C H a R G I N G a N D B a T T E R y L I F E

21
2
2.7 How do I connect the charger?
Charge before initial use. The charger lead only fits one way. The plug is marked with an arrow
on the top face. Always insert the charger lead carefully with the arrow
facing the top of the phone as shown:
DO NOT use excessive force which may damage the USB socket
Physical damage to the USB port is NOT covered by warranty
The phone can also be charged by connecting it to a
computer using the USB lead supplied.
2.8 Tips about charging and battery life
• Only use the AC charger and USB lead supplied.
• Insert the charger lead carefully with the arrow facing the top of the phone.
• Normal charge time is 2-3 hours. Do not leave on charge for more than 24hrs
• When not using the phone for long periods remove the battery.
• Charge the battery between 0°C~50°C. Charge promptly when flat.
• With poor network conditions (less than 2 bars) battery life is reduced.
• To increase battery life turn off Bluetooth when not in use and limit multimedia functions
• After charging in the OFF state turn the phone ON by long pressing
• Battery life will be improved after a few charge / discharge cycles.