Telecom R6 - Dial Up Networking (Internet)

73
12
• Make sure Bluetooth is On and in Show mode and the other device is in Pairing Mode
• On the handset go to Bluetooth: Menu > Tools > Bluetooth > My Devices
• Press the Right Soft Key to Search
• From the list of available devices select the required device and press OK to Connect
• Enter the pass code specified in the user guide of the far end device (eg 0000 or 1234)
• When the devices are paired the handset will report the device has been added
• In My Devices go to the new device and press OK to Connect
• The devices are now Connected
• When connected, incoming calls are sent to the Bluetooth device automatically. Press the call
button to answer.
• During a call press Options > Switch to Handset to return the call to the handset
12.12 Dial Up Networking using USB or Bluetooth
Dial Up Networking (DUN) is a method to connect your PC or MAC to the internet using the handset
as a modem.
1.Dial up Networking over USB using the Windows Wizard
Make sure JoinME is installed, the handset is on and connected to the PC using the USB lead supplied.
Example for Windows XP
On the PC go Start > Accessories > Communications > New Connection Wizard and
follow the prompts:
Connect to the internet > Set up my connection manually > Connect using a dial up
modem
Select the ZTE USB Modem and uncheck any other modems